Should you hire a journeyman with a lot of short jobs?
Hiring an electrician job hopper? Six shops in five years can be fine. How to read his work history, three questions, a reference script and a pay plan.
Maybe. A journeyman with a lot of short jobs isn't a no on its own, because construction jobs end and the men on them get laid off. What matters is why each one ended. Laid off when the job finished is normal. Quit mid-job for $2 more, three times running, is the pattern that will cost you.
For scale: the median construction worker had been with his current employer 3.9 years in January 2026, against 4.1 years for all wage and salary workers, per the BLS Employee Tenure release. So six shops in five years is more moving than most. It still might be a hand you want.
01What normal looks like in construction
Construction hands stay with one employer about as long as everyone else, and younger workers move more than older ones.
| Group (BLS, wage and salary workers) | Median years with current employer, Jan 2024 | Jan 2026 |
|---|---|---|
| All workers | 3.9 | 4.1 |
| Private sector | 3.5 | 3.9 |
| Construction industry | 4.2 | 3.9 |
Source: BLS Employee Tenure, Table 5, released September 2026.
Age matters as much as trade. BLS found the median tenure of workers 55 to 64 (9.6 years) was more than three times that of workers 25 to 34 (3.0 years). A 28-year-old new journeyman with three shops in his first five years after his card is closer to normal than a 50-year-old with the same history.
People are moving right now, too. About 198,000 construction workers quit in September 2026, 2.4% of the industry's jobs in one month, per BLS JOLTS (preliminary). Some of the hands on your desk are good men who left a bad situation.
02What the owners we talk to are worried about
The worry isn't the short jobs. It's the reason behind them.
One residential and commercial contractor told us the journeymen he'd hired "go from job to job trying to make more money, and sometimes they're not even good workers." He went on: they "want to be in charge of some apprentices, and at the end of the day I'm paying more to fix their stuff." Another contractor told us many journeymen come to him only to get more money.
Neither of them said "never hire a man who moves." Both hire journeymen every year. They want to know before the first check whether this man moves because jobs end, or because someone else offered $2 more. A miss is expensive: what a bad journeyman hire costs works the math on three weeks of one.
03How to read the work history
Sort every job on his resume into one of five kinds of exit, then count. One bad exit is a story. Three of the same is a pattern.
| How it ended | What it usually means | What to check |
|---|---|---|
| Laid off at job end or between phases | Normal for project work | The job's real end date, from his foreman |
| Laid off in a slow stretch, last in | Normal, especially for a new J-man | Was he called back? |
| Quit mid-job for more money | Rate-driven. Fine once, a pattern three times | What he was making at each |
| Let go | Could be him, could be the shop | His version, then the foreman's |
| Traveled, went out on his own, moved home | Usually a life choice, not a work problem | Dates line up with the story |
Two things about this table.
First, getting short-termed is the shop's call, not his. A man laid off at the end of five jobs in five years did nothing wrong. He may be the best hand on the list, and he may be looking for exactly what you have: a shop with a next job.
Second, travelers move by design. Hands who go where the work is, including union members traveling on Book 2, will show a lot of employers. Don't hold it against them. Ask what kind of work they ran on each job and whether they want to go local now.
04The three questions that sort it
Ask these in the interview, after the trade questions. Write the answers down so you can check them on the reference calls.
1. "Take me through your last four jobs. How did each one end?"
Go one job at a time: dates, what he ran, and how it ended. Don't let him summarize.
- Good sign: clear dates, the job ended or the phase ended, he names the foreman. "Hospital job wrapped in March. They didn't have anything until fall, so I went to the next one."
- Bad sign: fuzzy dates, a different reason every time, and every one is someone else's fault.
2. "What were you making at each one, and what made you move?"
This is the rate-chaser question. A man who moved from $36 to $38 to $40 to $42 in a year and a half, quitting mid-job each time, is telling you what he'll do here.
That's not always a no. If he's honest and your rate is fair, he may stop once he's paid right. But hire him knowing it, and set up his first 90 days so you find out early (see the pay plan below).
3. "Which of those foremen would hire you back? Can I call him?"
The best question on the list. A good hand names one or two foremen right away and gives you the number. A man who can't name one, or only gives you office numbers, has told you something.
For how to word the leave question itself ("what made you pull the pin?"), see the journeyman interview questions. Don't ask it twice; ask these three instead.
05The reference call: would you hire him back?
Call the foremen he named, not the office. Many offices only confirm dates. A foreman will tell you what happened.
The old way was a call to another owner: "Hey Donny, how was this guy?" Those calls are getting harder as the men who made them retire. One owner told us hiring now is "still a casino." The script below gets you close to that old call with a foreman you've never met.
OPM's guidance on reference checks: ask every applicant's references the same set of questions, plan about 20 minutes per contact, and talk to at least three contacts (OPM). For a journeyman, two foremen and one PM is plenty.
The script for a man with a lot of short jobs:
- "He says he was with you from March to October last year. Is that right?"
- "What did you have him running?"
- "How did it end? Did the job end, or did he leave?"
- "If he left, did he finish what he was on first?"
- "Would you hire him back on your next job?"
Number 4 matters most for this hire. A man who leaves at a good stopping point is a different hire from one who walks off mid-pull. Number 5 is the one to listen hard to. A fast "yes, today" means something. A pause and "he was all right" means something else.
06Set up the first 90 days so a rate chaser shows himself early
You can't stop a man from leaving, but you can set up the first 90 days so you learn fast and don't overpay before you know.
One contractor told us he starts journeymen at $55 an hour against an area average he puts near $45 (his figures), "to see what they really are about." Paying above market gets you a better look at good hands. It also means the rate chaser who walks in week three walks with your top rate.
Another way is a step plan tied to checks. Here's an example, not a recommendation for your market. Say the going rate for the work is $44 an hour and you'd pay him that once he proves out. Count 13 weeks of 40 hours.
| Plan | Days 1 to 30 (4 weeks, 160 hours) | Days 31 to 90 (9 weeks, 360 hours) | First 90 days |
|---|---|---|---|
| Flat at $44 | $7,040 | $15,840 | $22,880 |
| $40, then $42 at day 30, $44 at day 90 | $6,400 | $15,120 | $21,520 |
The step plan pays $1,360 less over the first 90 days. That isn't the point. The point is a hand who only came for the rate has nothing to stay for at day 30 except the next step, and a good hand earns $44 by day 90 and knows exactly why.
Rules for a step plan that works:
- Put the steps in the offer, in writing. Dates and amounts. No "we'll see."
- Tie each step to a check your foreman can make. The day-30 and day-90 checks in how long before you know a new electrician will work out work for this.
- Pay every step on time, without him asking. Miss one and you've taught him to look around.
- Don't start below market. A good hand won't take it, and a rate chaser will leave sooner. How to set a journeyman's pay rate covers finding the number.
Then give him a reason to stay past day 90 that isn't only money: a next job lined up, a foreman who backs him, OT he can count on. Most of that is in how to keep good electricians from leaving.
07When to pass
Pass when the pattern and the references agree. Three or more quits mid-job, no foreman who'd hire him back, and a story that changes between the interview and the reference calls: that's the man who will leave you mid-job too.
Hire him when the short jobs were mostly job ends, at least one foreman would take him back, and he passes your trade checks. That man may have spent five years looking for a shop with steady work.
If you're tired of guessing on resumes, see the electricians we already have near you. No money up front. If you don't hire, you don't pay.
Got more work than guys?
We already found them: 238 qualified electricians, 5+ years each. See who we have near you. No money up front. If you don't hire, you don't pay.
See who we haveFAQFAQs
Is job hopping a red flag for an electrician?
Not on its own. Construction jobs end and men get laid off, so a lot of short jobs can be normal. Quitting mid-job over and over is the red flag. Ask how each job ended and call his foremen.
How many jobs is too many for a journeyman?
There's no set number. The BLS median for construction workers is 3.9 years with the current employer as of January 2026, so one shop a year is more than most. Count the quits mid-job, not the total. Three of those in a few years is a pattern.
Can I ask an electrician why he left his last job?
Yes. It's one of the most useful questions you can ask, as long as you ask every applicant the same way. Check the answer against what his last foreman tells you.
Should I call his current employer?
Not without asking him first. A working journeyman may not have told his shop he's looking at a move. Ask for foremen from past jobs instead, and call the current one only after an offer, with his OK.
Will paying a job hopper more make him stay?
Sometimes. If he moved because he was underpaid, a fair rate may settle him. If he moves every time someone offers $2 more, a higher start only raises what you pay until he leaves. Steps tied to the first 90 days tell you which kind he is.
Sources
- Bureau of Labor Statistics, Employee Tenure Summary (released September 2026, January 2026 data)
- Bureau of Labor Statistics, Employee Tenure, Table 5: Median years of tenure with current employer by industry
- Bureau of Labor Statistics, JOLTS, Table 4: Quits levels and rates by industry and region
- U.S. Office of Personnel Management, Reference Checking
