How to hire a working foreman who still wears tools
How to hire a working electrical foreman: who to go after, what to pay against BLS supervisor data, the overtime rule, the offer and what to test.
To hire a working electrical foreman, go after a licensed journeyman with 6 or more years who leads a few hands, and pay him above your best J-man. BLS puts the median for supervisors at electrical contractors at $44.95 an hour, against $29.60 for electricians at the same shops (May 2025). Test him on running work and on the tools.
01What a working foreman is, and when you need one
A working foreman runs the job and still runs pipe: he reads the plans, plans the week, deals with the GC and the other trades, then puts his tools back on.
On a small commercial job that's most of what you need from a lead. You can't carry a non-working foreman on a crew of four. You also can't keep driving job to job yourself.
One small commercial contractor told us he was leading crews himself and checking on them 3 or 4 times a day. When he wasn't there, things went sideways: "he bent all this pipe wrong, now you've got to go back for hours." His shop had 5 to 8 in the field and was looking for 1 or 2 working foremen with 6 to 8 years, licensed, who could "lead the job, read the plans, talk to the other trades, then put his tools back on and still run pipe and pull wire."
That's the sign. If you're the only one who can run a job, and the rework shows up the days you're not there, your next hire is a foreman. If you're not sure yet which slot to fill next, who to hire as your crew grows lays out the order.
The hiring steps are the same ones you'd use for anyone; how to hire a journeyman electrician walks through all eight. This post covers what changes when the man you need has to run the job.
02Who these foremen are right now
The working foreman you want is almost always employed, usually as a lead or journeyman at a bigger shop, and he won't see your ad on a job board.
The same contractor put it plainly: "The guys we're trying to find have a job. They're not on Indeed." One hiring push for several roles drew 195 applicants, and six passed basic screening. For the licensed electrician job, he got zero.
So look for these four:
- The lead stuck behind a general foreman. He runs a piece of a big job but won't get his own crew for years. Your job is his own crew.
- The senior J-man at a large contractor. He's been running work informally and not getting paid for it.
- The foreman on a big job that's winding down. A data center or plant job ends at a phase. Some of those foremen want local work and home at night. What data centers are doing to your hiring covers why that pull is so strong and what a smaller shop can offer against it.
- The man who ran his own small shop. He knows estimating, customers and paperwork, and may be tired of chasing payments.
Ask your best hands who they've worked under. A good foreman leaves a trail of men who'd follow him.
03What a working foreman wants
A foreman weighs four things before the rate: who's on his crew, whether the PM backs him, how much he's on the tools, and whether there's a next job.
Answer those before he asks:
- The crew. Name the hands he'll run, their years and their cards. A foreman with three green helpers and a tight schedule is set up to fail, and he knows it.
- The backing. Who does he answer to, and can he send a man home? If you'll overrule him in front of the crew, he won't take it.
- Tools vs paperwork. Say what share of his week is on the tools. "About 70% on the tools, the rest planning, material and the GC" is a real answer.
- The next job. Tell him what's in backlog. A foreman who just finished a big job knows what it feels like when the work stops.
Then the things that pull him off a big job: home at night, steady work, a truck, and a say in who you hire next.
04What to pay a working foreman
Pay a working foreman clearly above your top journeyman, and use BLS supervisor pay as the yardstick.
| Group, electrical contractors (BLS, May 2025) | 25th pct | Median | 75th pct |
|---|---|---|---|
| First-line supervisors (47-1011) | $36.80 | $44.95 | $56.84 |
| Electricians (47-2111) | $23.23 | $29.60 | $38.82 |
Source: BLS OEWS, May 2025, national industry estimates for electrical contractors and other wiring installation contractors. Hourly straight time, no overtime, per diem or benefits.
Two cautions before you use those numbers. The electrician row includes apprentices, which drags it down. And a working foreman who spends most of his day on the tools may be counted as an electrician, not a supervisor. So read the supervisor median as what the market pays men whose main job is running work, and expect a working foreman to land somewhere between your top J-man and that.
Across all industries, construction trade supervisors had a median of $38.42 an hour ($79,920 a year) in May 2025 (BLS OEWS). Electrical contractors pay their supervisors more than that.
The contractor above advertised his working foreman spot at $30 to $45 an hour, with a take-home truck and benefits. That's a wide range. A range that wide tells a foreman the real number is near the bottom, so narrow it before you post.
Union sheets set the foreman rate as a percentage over journeyman scale, so the bump is written down. What electrical foremen make has those ratios by local.
An example you can check. Say your best J-man makes $36 an hour and you hire a working foreman at $42. The $6 difference over 2,080 straight-time hours is $12,480 a year. Now say you're spending 2 hours a day driving to check on crews. Over 250 workdays that's 500 hours of your time a year. If the foreman gives you most of those hours back for bidding and walking new work, and cuts one or two rework days a month, he pays for the bump fast.
05Salary or hourly: watch the overtime rule
If he's a working foreman, plan on paying overtime past 40 hours, even if you put him on salary.
The federal executive exemption needs a salary of at least $684 a week and a primary duty of managing (DOL Fact Sheet #17A). The same fact sheet says construction workers are not exempt "no matter how highly paid they might be."
The regulation speaks to your exact hire: "an employee whose primary duty is to work as an electrician is not an exempt executive even if the employee also directs the work of other employees on the job site, orders parts and materials for the job, and handles requests from the prime contractor" (29 CFR 541.106).
That describes a working foreman. Pay him hourly with OT, or price a salary knowing the hours past 40 may still be owed. State law can add to this, so check yours.
06How to write the offer
Put the whole job in writing in one page, so he can lay it next to what he makes now.
- The rate. One number, hourly, and when it's reviewed.
- Hours and OT. Normal week, OT after 40, how often you run Saturdays.
- The crew and the work. Who he runs, what kind of jobs, how much is on the tools.
- The truck. Take-home or not, fuel card, who pays tolls.
- Benefits with dates. What starts day one, what starts at 30 or 90 days, the match.
- Any bonus with its terms. A sign-on paid at 90 days, or a bonus tied to jobs coming in on hours, with the number.
- Who he answers to, and that he has a say in who joins his crew.
Make it within a day of the interview. A working foreman has a job and a boss who'll counter.
07What to test before you hire him
Test two things: can he run the work, and can he still do it with his own hands.
For running the work, ask the people questions from the electrical foreman interview questions: biggest crew, how he plans a week, a sloppy J-man, a wrong call from the GC's super. Score them the same way for everyone.
Then add three checks that matter more for a working foreman:
- Hand him a set of prints. Pick a small tenant finish-out sheet. Ask him to walk you through the order of work, the material for the first week and what he'd RFI. Ten minutes tells you if he reads plans or guesses.
- Put a bender in his hands. An offset and a kick on EMT, square and on the mark. A man who can't bend can't check anyone else's bends. A 30-minute electrician skills test has the setup and the pass marks.
- Look up his card. Same as any hand, on the state board, by license class. If your jobs need a master on the permit, settle who pulls it before the offer.
Call two references and ask one question of each: "Would you put him in charge of a job again?"
If you need the foreman or the hands to put under him, see who we already have near you, journeymen to superintendents. No money up front. If you don't hire, you don't pay.
Got more work than guys?
We already found them: 238 qualified electricians, 5+ years each. See who we have near you. No money up front. If you don't hire, you don't pay.
See who we haveFAQFAQs
What is a working foreman in electrical?
A working foreman leads a small crew and still does electrical work most of the day. He plans the work, orders material and deals with the GC, but he's also running pipe and pulling wire. On small commercial jobs he's usually the only lead on site.
How many years should a working electrical foreman have?
Most shops ask for a journeyman license and 6 to 8 years in the trade, with some time leading a few hands. Years matter less than proof: a job he ran, a crew size he can name and a GC who'd take him back.
Should I promote a journeyman or hire a foreman from outside?
Promote when one of your J-men already runs work, the crew listens to him and he wants it. Hire from outside when the job is bigger than anything your people have run. Either way, pay him for the job on the first day he does it.
Can I pay a working foreman a salary with no overtime?
Under federal rules, a foreman whose primary duty is electrical work is not exempt, even if he directs the crew and orders material. So he's still owed overtime past 40 hours. Check your state's rules too.
Sources
- Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 data tables
- Bureau of Labor Statistics, OEWS bulk data files (occupations 47-1011 and 47-2111, electrical contractors)
- U.S. Department of Labor, Fact Sheet #17A, Exemption for Executive, Administrative, Professional, Computer and Outside Sales Employees
- 29 CFR 541.106, Concurrent duties
