How to hire electricians for generator installs
How to hire a generator installer electrician: who fits 1 to 2 day outdoor jobs, the license, what to test on Article 702, the ad and how to pay.
To hire a generator installer electrician, look for a licensed hand who likes a new site every day: a service electrician or a residential J-man who wants variety. Test him on load calcs, transfer switches and NEC Article 702. Put the route, the truck and the weather in the ad. BLS puts the median electrician at $30.38 an hour (May 2025).
01Why generator install hires are hard to keep
Generator work is short, outdoor and on the move, and plenty of good electricians don't want that.
One residential standby generator contractor told us his jobs run 1 to 2 days, outdoors, at a different house almost every day, in a company vehicle, 40 hours a week. "Generators are outside, some guys don't like that." He hires about 1 out of every 3 or 4 people he interviews.
That's the whole problem in two lines. A hand who spent six months on one commercial job, with a trailer, a gang box and the same crew, walks into a job that changes every morning. Some love it. Some last two weeks.
So the hire is less about finding any licensed electrician and more about finding the one who fits the route. If you're still deciding whether a generator installer is your next hire at all, who to hire as your shop grows lays out the order.
02Who fits generator install work
The best fits are electricians who already work alone, on short jobs, in front of homeowners.
| Background | Why he fits | What to watch |
|---|---|---|
| Residential service electrician | Used to a new house every day, talks to homeowners, carries his own stock | May not have set pads or run long feeders |
| Residential new construction J-man | Knows panels, services and load calcs | Used to a crew and an empty house, not a homeowner at the door |
| Service upgrade or panel change hand | Already does meter, service and panel work | Ask how he handles a full day outside |
| Big commercial or plant J-man | Strong on gear and pipe | Often wants one site for months; ask him straight |
| Former generator dealer tech | Knows the units, start-up and service | Check the license, not just the factory training |
Two questions sort them fast. "How do you feel about a different site every day?" and "What's the worst weather you've worked a full day in?" A man who lights up at the first and has a real answer to the second is worth a second look.
The residential service hire is close to this one. How to hire a residential service electrician covers the ride-along and the first 30 days on a truck, and most of it carries over.
03What license generator work needs
The electrical side needs whatever electrical license your state requires for that work, and the gas side may need a separate license.
Most states license electricians, and a standby generator install is electrical work: the transfer switch, the feeder, the service tie-in, the controls. Some states have a limited residential class that may cover it. Check what your state allows each class to do before you write the ad, and look up every applicant's license on the state board's site before the interview.
The fuel line is a different question. In many places, running gas pipe to the unit falls under a plumbing, gas fitter or fuel gas license, not the electrical one. Rules differ by state and sometimes by city, so check with your state board and your local building department before you send an electrician to connect gas. Some shops hire licensed gas help for that piece; some sub it out.
As of 2026, confirm both licenses with your state before you post. Getting this wrong means a failed inspection, or worse, an unlicensed gas connection on a customer's house.
04What to test on the interview
Test the four things a generator install job lives or dies on: load calcs, transfer switches, service work and the homeowner.
Load calcs and Article 702
Most home standby units are optional standby systems under NEC Article 702. The 2023 NEC, Section 702.4(A)(2), says that if the load connects automatically, the standby source has to supply the full load it picks up, or an energy management system has to limit the load to what the source can carry. The calc follows Parts I through IV of Article 220 or another approved method.
That's the trap on an automatic transfer switch. Ask him:
- "A house has a 200 amp service and the customer wants the whole house on a 22 kW unit. What do you do?" You want to hear load calc first, then either a bigger unit or load management.
- "What's the difference between a whole-house ATS and a load center transfer switch?"
- "Where does the neutral get switched, and when does that matter?"
A man who sizes by what the salesman sold isn't ready to run a job alone.
Transfer switches and service work
Hand him a one-line of a typical install: meter, ATS, main panel, unit. Ask him to walk it out loud, from the utility to the last breaker. Ten minutes tells you if he's done it or watched it.
Then ask about service upgrades. Plenty of generator jobs turn into a meter base or panel swap when the old gear won't take it. He should know how to coordinate a disconnect with the utility in your area.
Bending and setting
He'll set pads, run conduit along the outside wall and seal penetrations. Put a bender in his hands for an offset and a kick. A 30-minute electrician skills test has the setup and pass marks.
The homeowner
He'll be on a customer's property all day, often with the customer home. Ask: "The homeowner wants the unit under the bedroom window. What do you say?" You want a calm answer about the manufacturer's clearances and code, not a lecture.
If you've got the work and need licensed hands for it, see the electricians we already have near you. No money up front. If you don't hire, you don't pay.
05What to put in the job ad
Put the day itself in the ad: the route, the truck, the weather and the hours.
A generator ad that reads like a commercial journeyman ad pulls the wrong people, who then quit when they see the work. Write what the week looks like:
- The jobs. "Home standby generator installs. Most jobs 1 to 2 days. New site most days."
- The truck. Take-home or not, fuel card, how far the route runs from the shop. What a take-home truck is worth to the man reading the ad is more than most owners think.
- The weather. "All outdoor work, all seasons." Say it. The ones who don't want it skip the ad instead of skipping work in month two.
- The hours. Start time, normal week, how often there's a Saturday.
- The rate and the license. One number or a tight range, and the license class you need.
- On-call, if any. Whether installers also take storm calls and service calls, and how that's paid.
The journeyman job ad template has the full fill-in version. Swap in the generator lines above.
06How to pay a generator installer
Most shops pay generator installers hourly, sometimes with a per-install bonus, and pay separately for on-call and storm work.
There's no public wage series for generator installers alone. The closest yardstick is BLS: electricians had a median of $30.38 an hour in May 2025 (BLS OOH), and those at electrical contractors had a median of $61,570 a year. Those are straight-time wages and include apprentices, so a licensed installer running jobs alone should land above the median in most markets. Check your own metro on BLS before you set the number.
One small residential and light commercial shop told us it pays a separate, higher hourly rate for generator installs than for its regular residential work, plus a small percentage of each install, plus extra for after hours. That's a common shape: hourly for the base, a little on each job for speed and care.
An example you can check. Say you pay $34 an hour for a 40-hour week, plus a $50 bonus for each finished install that passes inspection on the first try. At 3 installs a week, that's $1,360 in hourly pay and $150 in bonuses, $1,510 a week. Over 50 weeks that's $75,500. The bonus pays for first-time passes, not for rushing.
Under federal rules, bonuses he knows about and expects count in his regular rate for overtime (DOL Fact Sheet #56C), so a week past 40 hours costs more than the hourly rate times 1.5. Flat rate, per-call and commission plans walks through that math.
On-call and storm work
Generators sell after outages, and they fail during them. If your installers also carry service calls on nights and weekends, decide the on-call pay before you hire. Electrician on-call pay covers when waiting time counts as hours worked and four ways shops pay for it.
07Plan for heat and cold
Every day on this job is outside, so plan for heat and cold before the first day.
OSHA says almost half of heat-related deaths happen on a worker's first day on the job, and over 70% happen in the first week (OSHA, protecting new workers). Its rule of thumb for a new worker is 20% of a normal workday on day one in the heat, adding 20% a day until he's on a full schedule.
So a new installer who starts in July shouldn't work a full day in the sun on day one. Pair him with your lead for the first week, put water, shade and breaks on the truck, and start early. Winter needs the same thought: layers, a heated truck to warm up in and gloves he can still work in.
This is also where you lose people. A hand who gets cooked on day two quits on day three. Talk about the weather on the interview, then back it up the first week.
Got more work than guys?
We already found them: 238 qualified electricians, 5+ years each. See who we have near you. No money up front. If you don't hire, you don't pay.
See who we haveFAQFAQs
What license do you need to install a standby generator?
The electrical work needs the electrical license your state requires for it, and some states have a limited residential class that may cover it. The gas line often needs a plumbing or gas fitter license instead. Rules change by state and city, so check with your state board and local building department before you start.
Can a residential electrician install a whole-house generator?
Yes, if his license class covers the work in your state. Residential electricians already do services, panels and load calcs, which is most of the job. Check whether he can also do the gas connection, or plan for someone who can.
How long does a standby generator install take?
One generator contractor told us his installs run 1 to 2 days. It depends on the pad, the length of the feeder and gas line, and whether the service needs an upgrade first. A panel or meter swap adds time.
Do generator installers need to know load calcs?
Yes. Under 2023 NEC 702.4, an optional standby system with an automatic transfer switch has to carry the full load it picks up, or use load management to keep the load within what the unit can supply. An installer who can't run the calc can't tell when a unit is too small.
Should I hire a generator installer or train one?
Hire the license and train the units. A licensed electrician who knows services and load calcs can learn a manufacturer's start-up and service steps quickly. Training an unlicensed hand means waiting years before he can run a job alone.
Sources
- Bureau of Labor Statistics, Electricians, Occupational Outlook Handbook (pay, May 2025)
- OSHA, Heat Exposure: Protecting New Workers
- Code interpretation of 2023 NEC Articles 702, 705, 706 and 710, Dec 1, 2024, quoting Section 702.4(A)(2)
- U.S. Department of Labor, Fact Sheet #56C, Bonuses under the FLSA
- NFPA 70 (NEC) Code Development
