Hire a high voltage technician: who to look for and what to pay
How to hire a high voltage technician: the backgrounds that fit, NETA levels, screening questions, BLS pay data, the travel package and ramp time.
To hire a high voltage technician, look in three places: utility and substation hands, industrial electricians who've worked on plant gear, and NETA-certified test techs. Price against the right BLS line. In May 2025, power-line installers had a median of $45.83 an hour, and electricians working at utilities $51.27, against $30.38 for all electricians (BLS OEWS).
Then start early. Medium and high voltage hands are a small group, and a good one has three people calling him.
01What a medium and high voltage tech actually does
He works on the gear between the utility and the building: switchgear, transformers, breakers, relays, MV cable, and on renewables jobs, inverters.
The work is mostly testing, commissioning, warranty repairs and maintenance, not new install. That changes who fits. A commercial journeyman who sets gear and pulls feeders all day is close, but he may never have run a test set or written a switching order. Ask what he's done, at what voltage, and on whose gear. Get a number in kV, not "high voltage."
02Where good HV techs come from
Most come out of four backgrounds, and each one needs a different check.
| Background | What he brings | What to check |
|---|---|---|
| Utility lineman or substation hand | Switching, grounding, clearances, MV work every day | Has he worked inside gear, or only on lines? |
| Industrial maintenance electrician | Plant switchgear, transformers, breakers, outages | Highest voltage he's worked on, and whether he tested or only replaced |
| NETA-certified test tech | Test sets, reports, acceptance and maintenance testing | His NETA level, and how much field time he has without a senior tech |
| Commercial journeyman with gear time | Terminations, MV cable, setting gear, prints | Whether he's ever been the one who energized it |
One field service company told us every tech it had came from the manager's own contacts built over 15 years. That works until the work doubles. The same manager said, "I don't really like to hire residential guys, but I can teach them this." Translation: attitude and a clean safety record can make up for some gear time, but a residential hand will take longer to bill on his own.
03NETA certification levels
NETA, the InterNational Electrical Testing Association, certifies electrical testing technicians at four levels under its ANSI/NETA ETT standard. The levels tell you how much supervision he needs.
| NETA level | Name | Related experience | Training (safety / electrical) | Supervision |
|---|---|---|---|---|
| Level 1 | Trainee Technician | Entry level | High school or GED | Works under a Level 3 or 4 |
| Level 2 | Certified Assistant Technician | 2 years | 40 / 160 hours | Direct supervision of a Level 3 or 4 |
| Level 3 | Certified Technician | 5 years | 64 / 400 hours total | Can supervise Levels 1 and 2 |
| Level 4 | Certified Senior Technician | 10 years | 104 / 600 hours total | Runs large projects and crews, works on his own |
Source: NETA, Technician Certification, as of Nov 2026. Levels are taken in order, so a Level 3 has passed the Level 2 exam.
The practical rule: a Level 3 or 4 can lead a crew on a commissioning job. A Level 2 needs one of them on site. If the job spec calls for NETA-certified techs, ask which level, and look the man up before you put him on the bid.
04License questions to settle first
Whether a field service tech needs a state electrical license depends on the state and the work, so check before you send him.
Testing a transformer and installing one can fall under different rules. Where the work needs a journeyman card, he needs one that state accepts. Look it up the same day he gives it to you, the way you'd check any journeyman's card on the state lookup. If the work spans several states, sort the company license and the cards before the first truck rolls. The steps are in staffing a job in a state where you have no crew. Confirm with each state's board as of the job date; rules change.
05Screening questions for an HV tech
These take about 20 minutes on the phone and separate the man who's done the work from the man who's been near it.
- What's the highest voltage you've switched, tested or terminated? Which one of those three? You want a number and a verb.
- Walk me through the last piece of gear you tested. What tests, in what order? Listen for insulation resistance, turns ratio, power factor, contact resistance, relay testing. Listen for why he ran them in that order.
- Who wrote the switching order on your last outage, and what was your part?
- How do you set your approach distance on a job? OSHA's power generation, transmission and distribution standard (29 CFR 1910.269) requires qualified employees to be trained in minimum approach distances and in telling the nominal voltage of exposed live parts. He should answer without looking it up.
- What's the worst test result you've found, and what did you do with it? A good tech found something and wrote it up. A weak one says everything always passed.
- What NETA level are you, and when did you pass it? Then check.
- How much travel can you do, and for how long before you need to be home? On a 75% travel job, ask this first, not last.
- What made you pull the pin on your last job?
For a general journeyman screen, use the 10 phone screen questions that catch a laborer. The list above is for gear work only.
06What the pay data says
There's no BLS code for "HV tech," so use two lines and know what each one includes.
| BLS OEWS, May 2025 | Mean hourly | Median hourly | 90th pct hourly |
|---|---|---|---|
| Electricians (47-2111), all industries | $34.37 | $30.38 | $52.17 |
| Electricians at electric power generation, transmission and distribution | $49.14 | $51.27 | n/a |
| Electrical power-line installers and repairers (49-9051), all industries | $44.22 | $45.83 | $61.87 |
| Power-line installers at electric power generation, transmission and distribution | $48.38 | $49.30 | n/a |
Source: BLS Occupational Employment and Wage Statistics, May 2025, national data. Mean is the average; median is the middle. The 90th percentile is shown only for the all-industry rows we pulled.
Three things to know before you set a rate off this table:
- It's straight time. OEWS leaves out overtime, per diem and benefits. A travel tech's check on 60-hour weeks looks nothing like these numbers.
- The electricians line includes apprentices and helpers. That drags the all-industry median down. An HV tech isn't a median electrician.
- The utility rows are who you're bidding against. A substation hand at a utility already sits near $50 straight time, with steady hours and no travel. Your offer has to beat that once you add the road.
For setting a rate across your whole crew, see how much to pay a journeyman electrician.
07The travel package
HV field work is mostly travel work, so the package matters as much as the rate.
Another shop told us it runs about 75% travel and pays full GSA per diem plus a vehicle stipend and a fuel card. That's a clean offer a tech can do the math on. The GSA standard rate for FY2027 (Oct 1, 2026 to Sept 30, 2027) is $113 a night for lodging plus $68 a day for meals and incidentals, $181 a day. Seven days at the standard rate is $1,267 a week (our math: 7 x $181). Many cities are set higher, so look up the county.
Write the per diem with its unit and its days. How daily vs weekly and 7 days vs days worked change the cost is in what per diem to offer traveling electricians. Housing, trips home and keeping travelers to the last day are in how to recruit and keep a traveling electrical crew.
08Plan headcount before the work lands
HV hands take longer to find and longer to get billing, so count backward from the start date, not forward from the award.
The same field service company had 8 or 9 techs and figured that would hold through the year. "We'll be good with eight technicians till the end of the year. We were wrong." One customer alone then asked for 20 the next year.
Their numbers make a useful planning example. They hired about 1 in 3 to 5 interviews, and it took about three weeks from a signed offer to a billable tech. Say you need 5 more techs by a date, and you hire 1 in 4 interviews:
| Step | Math | Result |
|---|---|---|
| Interviews needed | 5 hires x 4 | 20 interviews |
| Offer to billable | about 3 weeks | Last offer signed 3 weeks before start |
| Interviews per week (example) | 5 a week | 4 weeks of interviews |
| Start interviewing | 4 weeks + 3 weeks | About 7 weeks before the start date |
That's before anyone turns you down or takes a counter from his boss. The full method, crew curve and all, is in how to plan manpower for an electrical job you just won.
09Keep the job board flood down
A general job post for an HV tech pulls everyone with "electric" in his work history, so put the knockouts in the form.
The same company ran one Indeed post and got about 900 applicants, more than half of them not electricians. "We had to shut it down." Every one of those resumes is a supervisor's time.
Put three or four yes or no questions in front of the application:
- Have you switched, tested or terminated gear at 5 kV or above? (Set the number to your work.)
- Can you travel 75% of the time?
- Which NETA level, if any, do you hold?
- Do you hold a journeyman license? Which state?
Put the voltage, the travel and the per diem in the first three lines of the ad. A residential hand reading "75% travel, MV switchgear testing" knows it isn't him. Why big boards pull so many wrong applicants, and what to measure, is in whether Indeed is worth it for hiring electricians.
If you've got more gear work than techs, see the electricians we already have near you. No money up front. If you don't hire, you don't pay.
Got more work than guys?
We already found them: 238 qualified electricians, 5+ years each. See who we have near you. No money up front. If you don't hire, you don't pay.
See who we haveFAQFAQs
Can a commercial journeyman do medium voltage work?
Some can. A commercial journeyman who has terminated MV cable and set and energized switchgear has a head start. One who has only done 480 volt and below will need time under a senior tech before he works on his own. Ask for the highest voltage, the gear and his exact part in it.
What does NETA Level 3 mean?
It's NETA's Certified Technician level. It requires 5 years of related experience, 64 hours of safety training and 400 hours of electrical training in total, and passing the Level 2 exam first. A Level 3 can supervise Level 1 trainees and Level 2 assistants.
How much do high voltage technicians make?
BLS has no separate code for them. As a yardstick, power-line installers had a median of $45.83 an hour nationally in May 2025, and electricians working at utilities a median of $51.27 (BLS OEWS). Both are straight time, before overtime and per diem.
How long does it take to get a new HV tech billing?
One field service company told us about three weeks from a signed offer to a billable tech. Things like site badging and vehicle setup can add to that, so build them into the start date you give the customer.
Should I hire HV techs as 1099 contractors?
Usually not if you control his schedule, tools and work. The IRS and the Department of Labor look at control, and the details are in the rules on hiring an electrician on a 1099.
