Electrician pay expectations in an interview: what to say

Electrician pay expectations in an interview: set your floor from local pay data, give one honest range, ask what it buys, and handle pay history.

Updated November 16, 20268 min read4 sources

Photo: Shameer Vayalakkad Hydrose, Pexels

When a shop asks what pay you want, give a short range whose bottom is a number you'd actually take, and one reason it's fair. Know it before you walk in. Nationally, the middle half of electricians made $23.76 to $40.36 an hour in May 2025 (BLS OEWS), so your area and your card matter more than any national figure.

The hand who answers in one breath sounds like he knows his worth. The one who says "can I get back to you on that" sounds like he doesn't.

01Know your number before you walk in

Walk in with three numbers: your floor, your target and the market around you.

Start with what your card is worth in your area. The national BLS spread looks like this:

BLS OEWS, May 2025, electricians (47-2111)Hourly
10th percentile$20.50
25th percentile$23.76
Median$30.38
75th percentile$40.36
90th percentile$52.17
Mean (average)$34.37

Source: BLS OEWS, May 2025, national data. These are straight-time wages with no overtime, per diem or benefits, and the code counts apprentices and helpers too. A carded journeyman with years in should measure himself against the upper half, not the median.

National numbers only get you started. Pull your metro the way our guide to what your license is worth lays out, and see the state and metro tables in journeyman electrician pay for 2026.

02Build your floor from what the move costs you

Your floor is your current rate plus what the new job takes away. Anything under it is a pay cut, even if the rate looks higher.

Here's an example. Say you make $34 an hour on 40-hour weeks, your shop matches 3% on your 401(k), and the new shop is 20 miles farther each way with no match for the first year.

What the move costsMath (example)Per hour on 2,080 hours
Extra driving40 more miles a day x 5 days = 200 miles a week; at 20 mpg and $3.20 gas, $32 a week$0.80
Lost 401(k) match for a year$34 x 2,080 = $70,720 a year; 3% = $2,121.60$1.02
Total$1.82

So $34 plus $1.82 is $35.82. Call your floor $36. At $35, that move pays you less than you make now. Your own numbers will be different. Swap in your miles, your gas, your match, and anything else you'd give up: vacation days you've earned, a take-home truck, a foreman who backs you.

Your target sits above the floor, inside what the market pays for your card and the work you can run. If you can run a job, price yourself like it.

03Why "can I get back to you" costs you

When you won't name a number, the shop picks one for you, and it picks low or moves on.

In one interview we sat in on, a candidate for a foreman spot was asked what rate he wanted. He said "can I get back to you on that" and asked the shop to name its number first so they could "meet within the middle." The offer stalled. The shop had a budget in mind and no idea where he sat in it.

In another interview for the same shop, a commercial and industrial hand said straight out he needed $35 an hour, and why: he was done with a long drive and wanted to run jobs. The shop knew in ten seconds whether it could get there.

A third man, a former shop owner, told the same shop, "I'm not here to get rich." He may have meant it. The shop still hears a lower number when you say that.

04What to say, word for word

Say the range, one reason, and stop. Here are lines to change to fit you. The dollar figures are examples, not what any shop will pay.

Hourly, journeyman:

"I'm looking at $38 to $41, depending on the hours and the truck. I've got my card and eight years in commercial, mostly gear and feeders."

Hourly, wants to run work:

"If I'm running the job, $42. If I'm on the tools under someone, $39."

Salary, foreman or service lead:

"I'm looking at $88,000 to $95,000 base, plus how OT and on-call work. What does the role usually run?"

When the ad already lists a range:

"Your ad says $34 to $40. With my card and years running service, I'm at the top of that."

When you need to stall a little, without stalling:

"My range is $37 to $40. I want to see the whole package before I lock in a number."

Then stop talking. Don't fill the quiet with reasons you might take less.

Keep the bottom of your range at or above your floor. Shops tend to hear the bottom number first. If $36 is your floor, don't say "$34 to $38."

05Ask what the number buys

The rate is one line of the offer, so ask about the rest before you agree to anything.

Ask these in the interview, flat and friendly:

  1. How many hours a week, and are they guaranteed?
  2. When does overtime start, and how much is there really?
  3. Per diem on travel jobs: how much, per day or per week, 7 days or days worked?
  4. Truck and gas card: day one, or after a review? One shop we sat in on gives the truck after a 30-day look.
  5. Health insurance: what does it cost me, and when does it start?
  6. 401(k): what's the match, and when does it kick in? The same shop matched dollar for dollar to 3%, partial to 5%, after six months. Six months without a match is real money.
  7. Tools, CE and code books: who pays?
  8. What's lined up after this job?

To turn the answers into one number you can line up against your current check, use how to compare two electrician job offers.

06When they ask what you make now

You can answer with what you expect instead, and in some states the shop isn't allowed to ask.

New York is one example. Since Jan 6, 2020, New York Labor Law Section 194-a bars all public and private employers in the state from asking an applicant's salary history or using it to decide whether to interview or hire him. The state's guidance says an employer "may ask an applicant for their salary expectations for the position instead," and an applicant can still volunteer his history if he wants (New York State, Salary History Ban). Other states and cities have their own rules. Check your state labor department's site before you count on one.

Wherever you are, these hold:

  • Answer with your expectation. "I'd rather talk about what this job pays. I'm looking at $38 to $41."
  • Don't pad your current rate. If you volunteer it, New York's guidance says the employer may confirm it, and a shop can call around in a trade this small. Getting caught costs more than the dollar you added.
  • Count the whole check if you share it. If you get a truck, per diem or a big match now, say so. "I'm at $35 with a truck and gas card" is a different number than "$35."

07Taking time to think

Ask for time after the offer, not before it. A day or two is normal. A week usually isn't.

Your range goes on the table in the interview. The yes or no can wait until you see the offer. Say: "Thanks. Send it over and I'll get back to you by Thursday." Ask for it by text or email so the rate, hours and start date are in front of you, then give your answer on the day you said.

If the offer comes in under your floor, say so once, with your reason: "I appreciate it. I'm at $34 now, and the drive and the lost match cost me about $2 an hour. I'd need $36 to make the move." If they can't get there, you already have a job. Whether a few dollars is worth moving for is in should you switch electrical companies for $3 more an hour, and if this exercise shows you're behind where you are now, how to ask for a raise as a journeyman uses the same numbers on your current boss.

Get your local pay report to see what electricians with your license make near you before your next interview. Takes about a minute and your boss never hears about it.

See what your license pays near you.

Tap a few answers and see what electricians with your license make in your area. Free, about a minute, and your boss never hears about it.

Get my local pay report

FAQFAQs

Should I give a range or one number?

A short range works best in the first interview, $3 or so wide, with the bottom at or above your floor. Once there's an offer on the table and you're countering, use one number. A range that's $10 wide tells the shop you don't know your number.

Is it OK to just say my pay is negotiable?

It's better than nothing, but it hands the shop the first number. If you say "negotiable," follow it with a range in the same breath: "Negotiable, but I'm looking at $37 to $40."

What if the job ad already lists a pay range?

Then you already know their budget. Place yourself in it and give the reason. Some states require ranges in ads. New York, for example, requires employers with four or more employees to post the minimum and maximum pay for advertised jobs (New York State Department of Labor).

Should I mention another offer in the interview?

Only if it's real and only if you'd take it. "I've got another offer at $39, and I'd rather be here" is honest, and it gives them a reason to move. Making one up can blow up the whole thing when they ask who it's with.

Do I ask about pay in the first interview if they don't bring it up?

Yes, near the end. "What does this role pay, and what are the hours?" is a fair question from a working hand. You already have a job, so you shouldn't spend a second interview on a number you'd never take.