Electrician to estimator: what the move really takes
Electrician to estimator: what the job is day to day, what field time already gives you, how to learn takeoffs, BLS pay data and what to ask first.
Going from electrician to estimator takes the field years you already have plus takeoff, software and bid-day skills you probably don't, and months of someone checking your numbers before you bid alone. BLS says workers with several years in construction sometimes qualify as estimators without a degree. At electrical contractors, estimators had a median of $92,900 a year (BLS OEWS, May 2025).
Your years in the field are the part a shop can't teach. The rest you can learn.
01What an estimator does all day
An estimator prices work before your shop builds it: he counts it off the drawings, puts labor and material on it, and turns in a number the shop has to live with.
A normal week looks like this:
- Takeoffs. Counting devices, fixtures and panels, measuring conduit and wire runs off the prints.
- Labor. Putting hours on every item, then adjusting for the job: height, occupied building, tight schedule, the crew you'll actually have.
- Quotes. Chasing gear, fixture and switchgear prices from the supply houses, often the day before bid.
- Bid day. Late addenda, last quotes coming in, a number out the door by the deadline.
- Site walks. Seeing existing conditions before you price them.
- Change orders. On a lot of shops, pricing the extra work once the job is running.
One contractor told us what he wants is someone who walks sites and is in the office, not remote, and not on a strict 9 to 5. Bid day doesn't care what time it is.
02What field time already gives you
Field time gives you the hard half: you know how long work really takes and what's missing from the drawings. As one contractor put it, "anybody can count dots."
A field hand who sat down to interview for an estimating seat said it the same way: "You have to have experience out in the field to be a good estimator because you can see it from start to finish."
| Skill | From the field | What you still need |
|---|---|---|
| Reading prints | Yes, you've built off them | Reading the whole set, specs included |
| Labor | You know a day's work | Labor units in a program, and adjusting them |
| Material | You know what goes in | Pricing it, and who quotes what |
| NEC | You install to it | Spotting what the engineer left out |
| Software | Probably not | Estimating and takeoff programs |
| Bid day | No | Deadlines, addenda, scope letters |
The software has names you'll hear in interviews: Accubid, McCormick and ConEst are a few of the electrical estimating programs, plus a takeoff tool. You don't need all of them. You need one, well.
Be honest about where you start. One commercial hand with decades in the field called himself "a junior, zero" on estimating and asked a shop for six months to get up to speed. That's a fair ask, and saying it straight is better than faking it on the first set of drawings.
03How to learn it while you're still on the tools
Start at the shop you're at. A boss who already trusts your work is the cheapest teacher you'll find.
- Take off a job you're running. Ask the estimator or PM for the drawings on your current job and count it yourself. Then compare your count to his.
- Track your own hours. Write down how long your crew takes on pipe, pulls, devices and terminations. That's your own labor unit book.
- Price a change order. Next time something changes on your job, write up what it'll take before the office does.
- Ask to sit in on a bid day. Watch how quotes, addenda and the final number come together.
- Take a class. Some community colleges teach it. Lakes Region Community College in New Hampshire, for one, has an intro course covering computer-aided electrical estimating and building an estimate from an electrical blueprint. Your local trade association may run classes too; ask them.
If you're a foreman, you're closer than you think. Running a crew already means planning manpower and material ahead of the work. What it takes to run work as a foreman covers that step, and plenty of estimators came through it.
04What estimators make next to electricians
At electrical contractors, estimators had a median of $92,900 a year, electricians $61,570 (BLS OEWS, May 2025). That's market data, not what any shop will pay you.
| At electrical contractors, May 2025 | Median | Mean |
|---|---|---|
| Electricians (47-2111) | $61,570 ($29.60 an hour) | $69,990 ($33.65 an hour) |
| Cost estimators (13-1051) | $92,900 ($44.67 an hour) | $94,950 ($45.65 an hour) |
| First-line supervisors, construction trades (47-1011) | $93,500 ($44.95 an hour) | $97,820 ($47.03 an hour) |
Source: BLS Occupational Employment and Wage Statistics, May 2025, NAICS 238210, electrical contractors and other wiring installation contractors.
Read it with three things in mind:
- OEWS is straight time. It leaves out overtime and per diem, and the electrician line includes apprentices. A J-man on 6-10s with per diem can out-earn the estimator median. Moving to estimating can mean a smaller check, not a bigger one.
- A new estimator starts low. At electrical contractors, the bottom 10% of estimators made under $58,970 a year and the top 10% over $134,110. You start near the bottom of that spread while you learn.
- Pay often comes as base plus bonus. Many shops pay estimators a salary plus a bonus tied to work sold or job profit. Ask exactly how it's figured.
BLS also projects cost estimator jobs overall to decline 3% from 2025 to 2035. There will be fewer seats, and the ones that open will want someone who knows the work. That's your edge. To see where your field number stands before you compare, line up both offers side by side.
05Questions to ask before you take an estimating job
Ask what you'll be pricing, who checks you, and how the bonus works. The field hand we mentioned asked two good ones: would he be bidding against other shops or pricing work already won, and who handles change orders. "If you don't get those change orders in, you're gonna lose money for your company."
The rest of the list:
- Who checks my numbers the first six months, and how will we know if I'm off?
- Which software do you use, and will you pay for training on it?
- How much is office, how much is site walks?
- What's a normal week, and what's bid week?
- Is it salary, hourly, or salary plus bonus? What does the bonus pay on, and when?
- If a job I bid loses money in the field, what happens?
- Is there a path to PM or running jobs I bid?
- How far is the office? You'll drive there every day, not to a different site each job.
If the answers are vague, the shop may not know what it wants yet.
06Is estimating right for you?
Estimating fits if you like the planning side more than the install, and you can sit for a full day with drawings. It's a bad fit if you need to be moving, or hate being blamed for a number months after you wrote it.
A lot of guys look at it when the work starts wearing on them. One hand in his fifties told a shop, "It beats your body up... I'm looking for a place to retire from." If that's you, other moves for electricians over 50 are worth a look next to this one. Estimating is also a common stop for guys who want their own shop someday; going from journeyman to contractor shows why pricing work is half of running one. For the full map of where field years can take you, see the paths an electrician's career can take.
Before you talk money with anyone, get your local pay report to see what electricians with your license make near you. Takes about a minute and your boss never hears about it.
See what your license pays near you.
Tap a few answers and see what electricians with your license make in your area. Free, about a minute, and your boss never hears about it.
Get my local pay reportFAQFAQs
Can an electrician become an estimator without a degree?
Yes. BLS says cost estimators usually need a bachelor's degree, but workers with several years of construction experience sometimes qualify without one. Electrical shops often want field time more than a degree.
How long does it take to learn electrical estimating?
It depends on you and the work you'd price. Plan on months, not weeks, with someone checking your numbers the whole time. One veteran commercial hand asked a shop for six months to get up to speed. Small jobs come first.
Do estimators make more than electricians?
On straight time, the median estimator at electrical contractors made $92,900 in May 2025 against $61,570 for electricians, per BLS. A journeyman with steady overtime and per diem can make more than that estimator median.
What software do electrical estimators use?
Electrical estimating programs like Accubid, McCormick and ConEst, plus a takeoff tool. Shops use different ones. Learn one well and ask in the interview which one they run.
Will I miss the field?
Some guys do. If you still want to see the work built, ask for site walks and a path to PM, so you can follow the jobs you price.
Sources
- Bureau of Labor Statistics, Occupational Outlook Handbook, Cost Estimators
- Bureau of Labor Statistics, OEWS May 2025, Electrical Contractors and Other Wiring Installation Contractors (NAICS 238210)
- Bureau of Labor Statistics, OEWS, Cost Estimators 13-1051
- Lakes Region Community College, Introduction to Electrical Estimating and Design
